Barco Coronis Fusion Guía de usuario descargar pdf (Pagina 32)

32 Coronis Fusion 6MP

TO ENABLE/DISABLE THE ETH. OVER USB:

1 Bring up the OSD main menu.

2 Navigate to the Configuration > Connectivity menu.

3 Enter the Eth. over USB submenu.

4 Select Enabled/Disabled as desired and confirm.

DDC HID Device

ABOUT DDC HID DEVICE

By default, the DDC HID Device will be enabled. This will allow the

internal C

ORONIS FUSION 6MP display processor to communicate directly

over USB with the connected PC.

By disabling the DDC HID Device, communication between the internal

ORONIS FUSION 6MP display processor and the connected PC will not be

possible. This does not disable the USB hub and still allows to make use

of the display’s USB downstream connectors and any external devices

connected to it (keyboard, mouse, ...).

Please note that a connection from a PC USB downstream connector to

the display’s USB upstream connector is required to be able to use this

functionality.

TO ENABLE/DISABLE THE DDC HID DEVICE:

1 Bring up the OSD main menu.

2 Navigate to the Configuration > Connectivity menu.

3 Enter the DDC HID Device submenu.

4 Select Enabled/Disabled as desired and confirm.

Enabling the USB endpoint is only recommended when you are

using a non-Barco display controller. If you are using a Barco

display controller, this communication will automatically be

done over the connected video cable(s).

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 83 84

Sin comentarios

Barco Coronis Fusion Guía de usuario Pagina 32