Barco Coronis Fusion Guía de usuario descargar pdf (Pagina 30)

30 Coronis Fusion 6MP

Key indicator lights

ABOUT THE KEY INDICATOR LIGHTS

By default, after lighting up, the key indicator lights will dim again if no

further actions are taken within the following 5 seconds. However, this

behavior can be changed so that the key indicator lights are always on

or always off.

TO CONFIGURE THE KEY INDICATOR LIGHTS:

1 Bring up the OSD main menu.

2 Navigate to the Configuration > User Interface > Indicator Lights

menu.

3 Enter the Keys submenu.

4 Select Automatic/Always On/Always Off as desired and confirm.

Power lock function

ABOUT THE POWER LOCK FUNCTION

By enabling the power lock function, the CORONIS FUSION 6MP display is

forced to remain switched on. This means that it can’t be switched to

stand-by mode until the power lock function is disabled again.

TO ENABLE/DISABLE THE POWER LOCK FUNCTION:

1 Bring up the OSD main menu.

2 Navigate to the Configuration > User Interface > Controls menu.

3 Enter the Power Lock submenu.

4 Select Enabled/Disabled as desired and confirm.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 83 84

Sin comentarios

Barco Coronis Fusion Guía de usuario Pagina 30