Barco CORONIS 1MP Especificaciones descargar pdf (Pagina 41)

System manual Coronis 1MP 42

3 Turn the wheel to select the desired menu item.

4 Perform the settings as described below.

The Settings menu contains the following items:

DPMS ..........................Press the control wheel to switch on/off the

automatic power saving system (DPMS)

Power LED ................. Click to switch the power LED on/off. Note:

The LED's orange DPMS state is not influ-

enced by this setting. So, when the display

goes into power-saving mode, the LED will

turn orange, even if it was switched off by this

setting.

User Controls ............. Click to disable the control wheel functions so

that the on-screen display cannot be used after

quitting the OSD menus.

To enable the control wheel functions again:

a) Do not use the wheel for at least 3 seconds

Turn the control wheel 1 click clockwise

c) Click the control wheel 2 times

d) Turn the control wheel 1 click counterclock-

wise

e) Select the Settings menu and switch Local

controls on again.

Actions b, c, d must be performed in a

sequence that takes no longer than 3

seconds.

Ambient Light Compensation ... Click to switch the Ambient Light

Compensation system (ALC) on/off.

Automatic Menu Exit ...Click to switch the automatic menu exit feature

on/off. When switched on, the OSD menus

automatically close when left idle for some

time.

Preset

To enter the Preset menu:

1 In the main menu, turn the control wheel to select the Preset

menu.

Display installation

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 112 113

Sin comentarios

Barco CORONIS 1MP Especificaciones Pagina 41