Barco ClickShare Manual de instalación descargar pdf (Pagina 26)

4. ClickShare installation

Necessary parts

• 4 m ounting screws

• 4 plugs

• Mounting bracket (included in the C lickShare box)

How to install

1. Drill four holes in the wall as indicated on the drawing.

Horizontal distance : 111 mm,

Vertical distance: 15 mm

111 ±0.15

Ø4.4

15 ±0.15

Image 4-1

Mounting bracket

2. Insert a plug in eac h hole (if needed, depends on the wall type) and drive in 4 screws.

Note: Mounting screws and plugs are not included in the ClickShare box . The type of s

crews and plugs depend on the type

of wall (stone, wood, plasterboard, ...) you are mounting the Base Unit to. Make s ure the head of the screw is not larger

than the hole in the bracket.

3. Place the bracket on the wall so that the holes in the ﬁxation ﬂanges matches the holes in the wall and that the ﬂanges are

touching the wall. Also, m ake sure that the big head of the ﬁxation slots is facing upwards.

4. Fixate the bracket with 4 screws (not delivered).

Note: Make sure that the head of your screws is bigger than the holes in the p late.

5. At the bottom s ide of the Base unit, turn in both delivered ﬁxatio n s cre ws.

Image 4-2

Base unit ﬁxation screws

6. Hook the Base unit into the m ounting bracket and slide the Bas e unit downwards until it is ﬁxed in the bracket.

CAUTION: It is only allowed to mount the Base Unit front side up or down. Mounting on its side is not allowed!

14 R5900014 CLICKSHARE 30/04/2014

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 71 72

Sin comentarios

Barco ClickShare Manual de instalación Pagina 26