Barco DC Toolset Guía de usuario descargar pdf (Pagina 106)

11. Input Slots for ViewScape

Luma Transient Improvement (LTI)

LTI accentuates the transient between two parts of the image with different intensity. The degree of im-

provement can be adjusted with the slider bar.

When on 0, the image is displayed without LTI. 7 represents the sharpest LTI.

Field Insert

Field insert can be ON or OFF.

With Field Insert ON, both fields of a interlaced image will be added together to form one de-interlaced

image.

When Field insert is ON, the De-Interlacing mode has no function.

11.3.3 Input Ga in Equalizing

Overview

Each gain can be adjusted between 0 and 255 (-3dB and +6dB).

Any value can be entered by

• clicking first in digit box and entering the desired value or

• sliding the corresponding slider to the desired value.

3 values, -3dB, 0dB, +6dB or preprogrammed and can be selected by clicking on the corresponding indi-

cation.

The slider jumps immediately to correct value.

The following input gain adjustments are possible:

• Luminance Gain

•V-Gain

•U-Gain

11.3.4 Dynamic Image Stabilizer (DIS)

Value

between 0 and 7.

Slide

magnified/normal.

Magnified for DIS effectivity. Useful for noisy video content.

Flash

ON/OFF

To compensate for fast moving images, the DIS Flash will detect such movements and put the DIS tem-

porary off.

DIS sensitivity

Select the amplitude sensitivity of the DIS

For low video quality sources choose Luma Low/ Chroma Low for video sources of high quality choose

Luma High/ Chroma High (preferable)

DIS filter

Select the frequency sensitivity of the DIS

102

R5976476 VIEWSCAPE TOOLSET 01/07/2004

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 132 133

Sin comentarios

Barco DC Toolset Guía de usuario Pagina 106