Barco R5900001 Guía de instalación descargar pdf (Pagina 61)

6. Web Interface

Image 6-21

Fixed IP address

The Advanced tab is displayed.

3. Check the radio button nex t to Fixed address (3 ).

The IP address, subnet and gateway input opens .

4. Click in the input ﬁeld of the IP address and ﬁll out the 4 ﬁ elds.

Note: An address contains 4 octets with a maximum value of 255.

This must NOT be 0.0.0.0 for static IP-Address assignment

5. Click in the Subnet mask input ﬁelds and ﬁll out the 4 ﬁelds as a ppropriate for the loca l subnet.

6. Click in the Default Gateway input ﬁelds and ﬁll out the 4 ﬁelds. Set the Default-Gateway to the IP-Address of the rou ter (MU ST

be on the loca l subnet!).

Note: This must NOT be 0.0.0.0.

If there is no router on the loca l subnet then just set this ﬁeld to any IP-Address on t he subnet.

7. Click Apply to conﬁrm the changes.

6.13 Advanced settings: WiFi settings

WARNING: It is not allowed to operate the Base Unit outside its intended geographical region.

About WiFi

A connection w ith the Base Unit can be made via a wireless connection. A ﬁxed wireless IP addr ess is used to establish the con-

nection.

How to set up

1. Log in t o the ClickShare web interface.

2. Click the Setup tab (1) and click Advanced (2).

R5900004 CLICKSHARE 04/12/2013

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 87 88

Sin comentarios

Barco R5900001 Guía de instalación Pagina 61