Barco Coronis Fusion 10MP Guía de usuario Pagina 14

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 80
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 13
14 Coronis Fusion 10MP
Connecting the signal cables
1 Connect one head of the display controller to the DVI 1 or
DisplayPort 1 connector with one of the supplied DVI or DisplayPort
cables.
2 Connect another head of the display controller to the DVI 2 or
DisplayPort 2 connector with one of the supplied DVI or DisplayPort
cables.
3 If you want to make use of your display’s USB downstream
connectors, connect a PC USB downstream connector to the
display’s USB upstream connector by means of the supplied USB
2.0 cable.
Each side of your display can have a different video input
connected (one side can have DVI connected while the
other side has DisplayPort connected). Both display sides
can have the same video input connected as well but
only one video input is allowed on each side of your
display.
Vista de pagina 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 79 80

Comentarios a estos manuales

Sin comentarios